Product Description
Raise your 1992-1999 Chevrolet/GMC Suburban 1500 2WD 5.7L gasoline V8 with this 2.5-inch front / 1-inch rear lift kit. The front uses coil spacers, while the rear uses lift blocks and the included Grade 8 U-bolt set. This version includes all four shocks and mounting hardware.
4-door 2WD only. 5.7L gasoline V8.
Vehicle fitment
- 1992-1999 Chevrolet C1500 Suburban 2WD
- 1992-1999 GMC C1500 Suburban 2WD
Fitment notes
- 1992-1999 Chevrolet/GMC Suburban 1500 (C1500) with 2WD and coil-spring front suspension. Does not fit K1500 or Suburban 2500. Does not fit 4WD/AWD, pickups or compact Blazer/Jimmy. Confirm body style before ordering.
- This release covers 5.7L gasoline V8 applications. Diesel applications require a separate fitment review and are not included.
- Professional installation and wheel alignment are required. Remove the factory alignment knockouts to permit fine adjustment. Check steering, suspension, brake-hose and ABS-wire clearance through the full range of motion.
- Aftermarket upper control arms are recommended with 2-3-inch front coil-spacer lifts. Upper control arms are not included. Verify bump-stop clearance and shock travel at full compression and extension.
- Grade 8 U-bolts, nuts and washers are included. Check the spring/plate stack, thread and clearance before tightening; bolts may need shortening. Lift amounts are approximate and vary with spring condition, equipment and load.
- Includes two front and two rear shocks with the specified mounting hardware. Confirm mount fit and full suspension travel during installation.
Items included
- Pair of front coil spacers — 2.5-inch nominal lift
- Pair of 1-inch rear lift blocks
- 4 Grade 8 U-bolts
- 8 U-bolt nuts
- 8 U-bolt washers
- 2 front shocks (SCL0561)
- 2 rear shocks (LCL0042)
- 2 front BP25 bar pins; 2 rear BP285 bar pins
- 2 SHSL15 sleeves; 2 stem mounting-hardware kits
