3/3 Lift Kit for 1999-2006 Chevy Silverado / GMC Sierra 1500 2WD & 2007 Classic - Coil Spacers

Product Description

Description:

This 3-inch front / 3-inch rear lift kit is configured for coil-spring-front 1999-2006 Silverado/Sierra 1500 2WD pickups and the supported 2007 Classic body. The exact front and rear components are listed below.

Coil-spring front, six-lug 1500 RWD pickups only; 2007 must be Classic body.

Includes:

• (1) Pair of 3-inch cast rear lift blocks
• (1) Pair of fabricated steel coil spacers for nominal 3-inch front lift
• (1) U-bolt set: four square U-bolts, eight nuts and eight washers

Vehicle Fitment: 

• 1999-2006 Chevrolet Silverado 1500 2WD
• 1999-2006 GMC Sierra 1500 2WD
• 2007 Chevrolet Silverado 1500 Classic 2WD
• 2007 GMC Sierra 1500 Classic 2WD

Fitment Notes:

• Fits 1999-2006 Chevrolet Silverado 1500 and GMC Sierra 1500 2WD pickups with front coil-spring suspension. Also fits the supported 2007 Classic-body 1500 2WD pickup configuration. Does not fit the redesigned 2007 truck.
• 1999 trucks must have the redesigned Silverado/Sierra 1500 body and six-lug, front-coil-spring chassis; carryover C/K Classic models are excluded.
• Does not fit torsion-bar front suspension, 1500HD, 2500/3500, AWD or 4WD. Confirm the front spring type; 2WD alone does not establish compatibility.
• Advertised lift heights are nominal and assume the specified factory configuration. Existing suspension changes and vehicle condition affect final height and rake.
• Professional installation and wheel alignment are required. Check brake-hose and ABS-wire clearance through steering and suspension travel. Shocks are not included. Check available shock travel for the selected lift.
• Front coil spacers are fabricated steel; they are not replacement coil springs. Advertised front lift is not the physical spacer thickness.
• Suitable aftermarket upper arms are recommended with 2-3-inch coil-spacer lift. The matching 2WD arm/adapter option is separate from this base kit.
• Confirm the rear spring/axle hardware matches the supplied square U-bolts and allows adequate thread engagement. Existing rear blocks affect net lift; stacking blocks is not assumed by the advertised height.
• Offset-pin rear blocks are recommended for crew-cab trucks. This version includes centered-pin blocks.
• Contact us about an offset-block option for this rear height. The current offset blocks are 4 inches tall; they are not a same-height replacement for every kit.

Related SKUS (if any):

1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Chevrolet / GMC Silverado 1500 / Sierra 1500 / Silverado 1500 Classic / Sierra 1500 Classic 2WD

99, 00, 01, 02, 03, 04, 05, 06 Chevrolet / GMC Silverado 1500 / Sierra 1500 / Silverado 1500 Classic / Sierra 1500 Classic 2WD