4/1.5 Lift Kit for 1999-2006 Chevy Silverado / GMC Sierra 1500 2WD & 2007 Classic - 4in Spindles + Shocks

Product Description

Description:

This 4-inch front / 1.5-inch rear lift kit is configured for coil-spring-front 1999-2006 Silverado/Sierra 1500 2WD pickups and the supported 2007 Classic body. The exact front and rear components are listed below.

Coil-spring front, six-lug 1500 RWD pickups only; 2007 must be Classic body.

Includes:

• (1) Pair of 4-inch lift spindles for this generation (left and right)
• (1) Pair of tie-rod spacers for the supplied lift spindles
• (1) Hub-plate spacer kit for the supplied lift spindles
• (1) Pair of 1.5-inch cast rear lift blocks
• (1) U-bolt set: four square U-bolts, eight nuts and eight washers
• (2) Front lift shock
• (2) Rear lift shock
• (1) Shock mounting hardware

Vehicle Fitment: 

• 1999-2006 Chevrolet Silverado 1500 2WD
• 1999-2006 GMC Sierra 1500 2WD
• 2007 Chevrolet Silverado 1500 Classic 2WD
• 2007 GMC Sierra 1500 Classic 2WD

Fitment Notes:

• Fits coil-front, six-lug 1999-2006 Chevrolet Silverado/GMC Sierra 1500 2WD pickups and 2007 Classic only. 1999 must be the redesigned body, not carryover C/K Classic; redesigned 2007 trucks are excluded.
• Does not fit torsion-bar front suspension, 1500HD, 2500/3500, AWD or 4WD. Confirm the front spring type; 2WD alone does not establish compatibility.
• Advertised lift heights are nominal and assume the specified factory configuration. Existing suspension changes and vehicle condition affect final height and rake.
• Professional installation and wheel alignment are required. Check brake-hose and ABS-wire clearance through steering and suspension travel.
• The 4-inch spindle option requires 17-inch or larger wheels with maximum 4.75-inch backspacing, per the current standalone specification. It includes the specified tie-rod spacer set.
• Confirm the rear spring/axle hardware matches the supplied square U-bolts and allows adequate thread engagement. Existing rear blocks affect net lift; stacking blocks is not assumed by the advertised height.
• Offset-pin rear blocks are recommended for crew-cab trucks. This version includes centered-pin blocks.
• See the linked 4-inch rear offset-block option. It changes the rear lift height unless this kit already has 4-inch blocks.
• Includes two front and two rear shocks with the recipe-specific mounting hardware.
• The included lift spindles increase front track width approximately 1 inch per side (2 inches overall). Front wheels will sit farther outward; verify wheel and tire clearance.

Related SKUS (if any):

1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Chevrolet / GMC Silverado 1500 / Sierra 1500 / Silverado 1500 Classic / Sierra 1500 Classic 2WD

99, 00, 01, 02, 03, 04, 05, 06 Chevrolet / GMC Silverado 1500 / Sierra 1500 / Silverado 1500 Classic / Sierra 1500 Classic 2WD