Trekline 5/7-8 Spindle/Coil Lowering Kit for 2002-2008 Dodge Ram 1500 2WD V6 + Shocks

Product Description

Description:

Set up your 2002–2008 Dodge Ram 1500 2WD V6 with 5 inches of front lowering and 7-8 inches of rear lowering. The front uses drop spindles paired with lowering coils. Rear lowering uses an axle flip kit with drop shackles. Required rear U-bolts are sold separately; see related products. Includes front and rear shocks.

IMPORTANT: Factory rear spring plates can break loose after a flip-kit installation because the factory welds are incomplete. We strongly recommend having a qualified welder fully weld the plates to the axle tubes during installation.

Includes:

• 2" drop spindles (pair)
• 3" front lowering coils (pair)
• Rear axle flip kit (U-bolts sold separately)
• Rear drop shackles (pair)
• Front shocks (x2)
• Rear shocks (x2)

Vehicle Fitment: 

• 2002-2008 Dodge Ram 1500 2WD

Fitment Notes:

• IMPORTANT: The factory rear spring plates are not fully welded to the axle tubes. Installing a flip kit places upward force on these plates, which can cause them to break loose. We strongly recommend having the factory spring plates fully welded to the axle tubes by a qualified welder during installation.
• Fits 2WD models only — will NOT fit 4WD trucks.
• The drop spindles require 17" or larger rims.
• The drop spindles extend track width by approx. 0.5" per side.
• Does NOT fit SRT-10 models.
• The front coils in this kit fit V6 models only.
• A C-notch is REQUIRED at this rear drop and is NOT included — see our kit versions with the C-notch.

Related SKUS (if any):

2002, 2003, 2004, 2005, 2006, 2007, 2008 Dodge Ram 1500 2WD

02, 03, 04, 05, 06, 07, 08 Dodge Ram 1500 2WD