Trekline 5/6 Spindles & Coils Lowering Kit for 1997-2003 Ford F-150 2WD V8

Product Description

Description:

Build a matched lowering setup for your 1997–2003 Ford F-150 2WD V8. Also fits the 2004 F-150 Heritage 2WD. Front lowering is 5 inches using drop spindles and lowering coils. Rear lowering is 6 inches using an axle flip kit.

A rear frame C-notch is required for a 6-inch or greater rear drop and is not included. Check wheel and lower ball joint clearance. Required hardware for 18- or 19-inch wheels is sold separately; see related items.

Includes:

• 2-inch front drop spindles (pair)
• 3-inch front lowering coils for V8 models (pair)
• Rear axle flip kit with Grade 8 U-bolts

Vehicle Fitment: 

• 1997-2003 Ford F-150 2WD
• 2004 Ford F-150 Heritage 2WD

Fitment Notes:

• Fits 2WD models only. Does NOT fit 4WD models.
• Also fits the 2004 F-150 Heritage 2WD. Does NOT fit the redesigned 2004 F-150.
• Fits models with a V8 engine only. Does NOT fit V6 models. See the related kits section for the other engine option.
• Drop spindles require 18-inch or larger wheels.
• 18- or 19-inch wheels require lower ball joint hardware, sold separately; see related items. 20-inch or larger wheels do not require this hardware.
• Check wheel backspacing and lower ball joint clearance before driving. Stud trimming may be necessary with smaller wheels.
• A rear frame C-notch is required for a 6-inch or greater rear drop and is NOT included. See the related kits section for the version with a C-notch.
• Shorter rear shocks are recommended. See the related kits section for the version with shocks.
• Shorter front shocks are recommended with lowering coils. See the related kits section for the version with shocks.

Related SKUS (if any):

1997, 1998, 1999, 2000, 2001, 2002, 2003 Ford F-150 / F-150 Heritage 2WD

97, 98, 99, 00, 01, 02, 03 Ford F-150 / F-150 Heritage 2WD