Product Description
This 6-inch front / 3-inch rear lift kit fits standard-suspension 1997-2003 Ford F-150 and 2004 F-150 Heritage 2WD applications. Shocks are not included; a matching four-shock version is available.
Standard suspension only; see complete application exclusions and wheel requirements before ordering.
Vehicle fitment
- 1997-2003 Ford F-150 2WD
- 2004 Ford F-150 Heritage 2WD
Fitment notes
- 1997-2003 Ford F-150 and 2004 F-150 Heritage 2WD only. Excludes redesigned 2004 F-150 and all 4WD.
- Standard suspension only. For 7-lug/7700-GVWR, Lightning or Harley-Davidson models, contact us to confirm fitment before ordering.
- Lift heights are nominal. Check the existing suspension setup; lift amounts do not guarantee final vehicle rake.
- Professional installation and a final alignment are recommended. Verify brake-hose, ball-joint and shock travel at full suspension and steering movement.
- Aftermarket wheels required: minimum 16-inch diameter and maximum 4.625-inch backspacing. Stock wheels do not clear.
- Spindles increase track width approximately 1/2 inch per side. Lower-control-arm clearance grinding may be needed, depending on year.
- Verify upper-control-arm clearance and alignment adjustment for the combined spindle/spacer lift. Additional clearance or alignment corrections may be needed.
- Shocks are not included in this base kit. Check the installed shocks for sufficient travel after lifting.
Items included
- (2) 3.5-inch lift spindles, driver and passenger sides
- (2) 2.5-inch fabricated front coil spacers
- (2) 3-inch rear lift blocks
- (4) round U-bolts with nuts and washers
